← Back to search

4 canvas(es) — paginate below the viewer, or use the Canvases tab on the right.

Stress-plates of rectangler shape

AI summary (β)
A paper consisting of an excerpt from a magazine article, dealing with the lines of maximum principal stress and stress distribution when a thin rectangular mild-steel plate is fixed around its edges and subjected to a uniform load. The authors are B. C. Laws and A. O. Allen, and the experiment was conducted in the Physics Department of the University of Leeds. It presents observations of deflection in a 36 in. × 14.5 in. plate, curvature calculations, and analysis using Poisson's ratio and Young's modulus. Phil. Mag. S. 7. Vol. L. No. 5. May 1926; January 21, 1926. Keywords: B. C. Laws, A. O. Allen, University of Leeds, Philosophical Magazine, thin steel plate, rectangular plate, maximum principal stress, uniform load, deflection, stress distributionAuto-generated by Azure OpenAI gpt-5.5 from OCR text (which may contain errors) and image captions.
Item ID
4b7d5be3-3815-48a9-b600-5299e0195878
Catalogue ID
40180501
Card catalogue
[Offprints of reference papers, etc., batch]
Doc type
雑誌記事抜粋?
Category
論文
Issued
1926-01-21
Extent
Type | 5 sheets
Holder
東京大学柏図書館
Year registered
2007
GCV entities
Document / Book

Other items in the same card catalogue1 item(s)

東京帝国大学 航空研究所報告(第十一巻第十一冊) 第百四十三号 四辺を固定せる矩形板のバックリングの再研究
東京帝国大学 航空研究所報告(第十一巻第十一冊) 第百四十三号 四辺を固定せる矩形板のバックリングの再研究
1936 · 報告書

Similar items24 item(s) (similar title / content)

THE DISTRIBUTION OF STRESS DUE TO A RIVET IN A PLATE.
THE DISTRIBUTION OF STRESS DUE TO A RIVET IN A PLATE.
1913 · 『ENGINEERING』記事抜粋
ESTIMATING SHIP STEEL WEIGHTS.
ESTIMATING SHIP STEEL WEIGHTS.
1928 · 論文抜粋
INSTITUTION OF NAVAL ARCHITECTS.
INSTITUTION OF NAVAL ARCHITECTS.
論文抜粋
ON THE DESIGN OF THE ANTARCHIC EXPLORATION VESSEL "DISCOVERY."
ON THE DESIGN OF THE ANTARCHIC EXPLORATION VESSEL "DISCOVERY."
1905 · 論文抜粋
東京帝国大学 工学部紀要 第二十冊 第四号 昭和七年三月
東京帝国大学 工学部紀要 第二十冊 第四号 昭和七年三月
1932 · 紀要抜刷
TWO NOTES ON SHIP CALCULATIONS.
TWO NOTES ON SHIP CALCULATIONS.
論文抜粋(英文切抜1枚挟)
PLATE IV(a). MIDSHIP AND TYPE SECTIONS OF U.S.S. WEST VIRGINIA
PLATE IV(a). MIDSHIP AND TYPE SECTIONS OF U.S.S. WEST VIRGINIA
断面図
PLATE IV(b). TYPE SECTIONS OF U.S.S. WEST VIRGINIA
PLATE IV(b). TYPE SECTIONS OF U.S.S. WEST VIRGINIA
断面図
THE STRENGTH OF SHIPS,WITH SPECIAL REFERENCE TO EXPERIMENTS AND CALCULATIONS MADE UPON H.M.S. "WOLF." By Professor J.H.BILES
THE STRENGTH OF SHIPS,WITH SPECIAL REFERENCE TO EXPERIMENTS AND CALCULATIONS MADE UPON H.M.S. "WOLF." By Professor J.H.BILES
船体強度関係論文(26枚、ENGINEERING記事の一部5枚付)
PLATE III. MIDSHIP AND TYPE SECTIONS OF U.S.S. PENNSYLVANIA
PLATE III. MIDSHIP AND TYPE SECTIONS OF U.S.S. PENNSYLVANIA
断面図
Specifications for building Triplescrew protected Cruiser of 7350 tons for the United States Navy
Specifications for building Triplescrew protected Cruiser of 7350 tons for the United States Navy
MODEL EXPERIMENTS ON THE ELASTIC STABILITY OF SUBMARINE PRESSURE-HULLS. By Constructor Lt.-Commander Viscount T.Tokugawa,Imperial Japanese Navy.
MODEL EXPERIMENTS ON THE ELASTIC STABILITY OF SUBMARINE PRESSURE-HULLS. By Constructor Lt.-Commander Viscount T.Tokugawa,Imperial Japanese Navy.
1928 · 徳川武定氏博士論文
Shannon upper DK. Plating
Shannon upper DK. Plating
1905
The Flettner Three-plane Rudders
The Flettner Three-plane Rudders
論文冊子(メモ2枚挟)
STANDARD PROTECTIVE DECK PLATE
STANDARD PROTECTIVE DECK PLATE
"Determination of Practice - hull scantlings for the improved No.64 type submersible" march 1925 Yt.Commander constructor T.Tokugawa
"Determination of Practice - hull scantlings for the improved No.64 type submersible" march 1925 Yt.Commander constructor T.Tokugawa
CARNEGIE STEEL COMPANY EXPERIMENTAL "SPECIAL TREATMENT" PROTECTIVE DECK PLATE
CARNEGIE STEEL COMPANY EXPERIMENTAL "SPECIAL TREATMENT" PROTECTIVE DECK PLATE
試験成績表
SPECIFICATIONS FOR RIVETING AND REFERENCE DATA FOR USE THEREWITH NAVY DEPARTMENT BUREAU OF CONSTRUCTION AND REPAIR EDITION NOVEMBER,1932
SPECIFICATIONS FOR RIVETING AND REFERENCE DATA FOR USE THEREWITH NAVY DEPARTMENT BUREAU OF CONSTRUCTION AND REPAIR EDITION NOVEMBER,1932
雑誌記事抜粋?
ON MECHANICAL TESTS OF TEST PIECES PREPARED FROM SAMPLES OF STEEL SUPPLIED BY MESSRS. WM. BEARDMORE & CO. LTD.
ON MECHANICAL TESTS OF TEST PIECES PREPARED FROM SAMPLES OF STEEL SUPPLIED BY MESSRS. WM. BEARDMORE & CO. LTD.
1924
Memorandum explanatory of "Dreadnought."
Memorandum explanatory of "Dreadnought."
論文(英文)
BRITISH STANDARD SPECIFICATION FOR STRUCTURAL STEEL FOR SHIPBUILDING.
BRITISH STANDARD SPECIFICATION FOR STRUCTURAL STEEL FOR SHIPBUILDING.
1905 · 論文記事抜粋
B.S."NAGATO" RESULTS OF CALCULATION OF BENDING AND SHEARING STRESSES.
B.S."NAGATO" RESULTS OF CALCULATION OF BENDING AND SHEARING STRESSES.
計算結果一覧表
INFLUENCE OF RUDDER SHAPES ON STEERING. Shipbuilding and Shipping ReCord.P.515,April 25,1929.
INFLUENCE OF RUDDER SHAPES ON STEERING. Shipbuilding and Shipping ReCord.P.515,April 25,1929.
1929
ON AN EMPIRICAL STANDARD FOR THE LONGITUDINAL STRENGTH OF THE HULL STRUCTURE OF STEEL STEAMERS,TOGETHER WITH TWO OTHER SUBJECTS. Tetsuo Ono,Member.
ON AN EMPIRICAL STANDARD FOR THE LONGITUDINAL STRENGTH OF THE HULL STRUCTURE OF STEEL STEAMERS,TOGETHER WITH TWO OTHER SUBJECTS. Tetsuo Ono,Member.
論文